How To Install Bnc Connector On Coaxial Cable

How do I Install a Twist on a Coaxial Cable Connector?

By David Lipscomb

i Hemera Technologies/AbleStock.com/Getty Images

Coaxial cables tin be terminated in a diverseness of ways. One such option is through use of a twist-on F connector. These connectors are useful if you do non possess a coaxial crimp tool, and facilitate easier swapping of the connectors in the event of damage. Although not equally h2o-resistant as a crimp-on version, twist-on coaxial fittings are durable plenty for conventional indoor employ.

Step 1

Cut the coaxial cablevision to the desired length, using the wire cutters. Try to make the stop of the cutting equally straight every bit possible.

Footstep 2

Lay the end of the coaxial cable into the cable stripper, butting the terminate of the cablevision against the stopper.

Step 3

Grip the handles of the tool. Rotate the stripper three or iv times in both directions. Pull off the unwanted outer insulation by hand, exposing the copper braided shield within.

Step iv

Separate the braid by manus. Fold the complect back against the outer jacket. Practice non exist concerned if a few of the shield strands fall off; this is normal.

Footstep v

Apply a liberal amount of silicone lubricant to the shield braid. This waterproofs the connection and aids in twisting the connector on.

Step 6

Push the connector as far every bit it volition go. Clamp the pliers or vice grips around the knurled collar of the connector. Twist the connector clockwise, firmly gripping the tool. Proceed until the inner flange of the connector sits firmly against the terminate of the white plastic tube surrounding the copper center conductor.

Step 7

Snip off any excess braided copper shield protruding from the base of the connector, using the tip of the wire cutters. Cutting off excess centre usher sticking out from the end of the connector with the cutters.

References

Writer Bio

David Lipscomb is a professional author and public relations practitioner. Lipscomb brings more than a decade of experience in the consumer electronics and ad industries. Lipscomb holds a degree in public relations from Webster University.

Source: https://itstillworks.com/install-twist-coaxial-cable-connector-13624.html

Posted by: smithpludenis.blogspot.com

Share this post